B-6
Firepower 8000 Series Hardware Installation Guide
Appendix B Inserting and Removing Firepower 8000 Series Network Modules
Insert the Module or Slot Cover
Insert the Module or Slot Cover
Use proper electrostatic discharge (ESD) practices such as wearing wrist straps and using an ESD work
surface when handling the modules. Store unused modules in an ESD bag or box to prevent damage.
Procedure
Step 1
Remove and reserve the T8 Torx screw from the lever of the module using the included screwdriver.
Step 2
Pull the lever away from the module to open the latch. The near end of the latch is visible. The far end
of the latch is inside the module.