Specification
Description
12.5 A peak at 100 V AC
6.0 A peak at 208 V AC
Maximum AC input current
1250 VA at 100 V AC
Maximum input volt amperes
1050 W
Maximum output power for each power supply
15 A (subcycle duration)
Maximum inrush current
12 ms at 1050 W
Maximum hold-up time
12 V DC
Power supply output voltage
12 V DC
Power supply standby voltage
Climate Savers Platinum Efficiency (80 Plus Platinum
certified)
Efficiency rating
RSP2
Form factor
IEC320 C14
Input connector
Hardware Specifications
The following table lists the hardware specifications for the AMP PC3000.
Table 3: AMP PC3000 Hardware Specifications
Specification
3.4 x 16.9 x 29.5 in. (8.64 x 42.9 x 74.0 cm)
Dimensions (H x W x D)
57.5 lb (26.1 kg)
Maximum weight (fully loaded chassis)
Operating: 50 to 95°F (10 to 35°C)
Maximum temperature is derated by 1°F/547 ft
(1°C/300 m) of altitude above 3117 ft (950 m).
Nonoperating: –40 to 149°F (–40 to 65°C) when the
appliance is stored or transported.
Temperature
Operating: 8 to 90% noncondensing
Nonoperating: 5 to 95% noncondensing
Relative humidity
Operating: 0 to 10,000 ft
Nonoperating: 0 to 40,000 ft when the appliance is
stored or transported
Altitude
Cisco AMP PC3000 Hardware Installation Guide
11
Overview
Hardware Specifications
