Cisco Aironet Wave 2 Cli Command Reference Manual Download Page 34

Page: 34 / 164

clear cts

To clear the statistics of Cisco TrustSec Security, use the

clear cts

command.

clear cts role-based counters

[

all

client mac-addr

from sgt to dgt

]

Syntax Description

Clears Cisco TrustSec summary counters

counters

Clears all Cisco TrustSec counters

all

Clears the Cisco TrustSec counters for a client MAC address specified in
xx:xx:xx:xx:xx:xx format

client mac-addr

Specifies the source group tag for filtered traffic

from

Security Group Tag (SGT); valid values are 0 to 65535

sgt

Specifies the destination group tag for filtered traffic

Destination Group Tag (DGT); valid values are 0 to 65535

dgt

Command Modes

Privileged EXEC (#)

Command History

Modification

Release

This command was
introduced.

8.1.111.0

This example shows you how to clear all the statistics of Cisco TrustSec Security counters:

cisco-wave2-ap#

clear cts role-based counters all

Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7

clear Commands

clear cts

Summary of Contents for Aironet Wave 2





































































































































































Search results

Summary of Contents for Aironet Wave 2

Reviews:

Related manuals for Aironet Wave 2

Brands by name

Popular brands

Cisco Aironet Wave 2, Cli Command Reference Manual

Search results

Summary of Contents for Aironet Wave 2

Reviews:

Related manuals for Aironet Wave 2

Brands by name

Popular brands