5
Cisco Aironet 6-dBi Patch Antenna (AIR-ANT2460P-R)
78-16940-02
Installing the Antenna
Site Selection
Before attempting to install your antenna, determine where you can best place the antenna for safety and
performance.
Follow these steps to determine a safe distance from wires, power lines, and trees.
Step 1
Measure the height of your antenna.
Step 2
Add this length to the length of the structure on which you are mounting the antenna and then double
this total for the minimum recommended safe distance.
Caution
If you are unable to maintain this safe distance, stop and get professional help.
Generally, the higher an antenna is above the ground, the better it performs. Good practice is to install
your antenna about 5 to 10 ft (1.5 to 3 m) above the roof line and away from all power lines and
obstructions. If possible, find a mounting place directly above your wireless device so that the lead-in
cable can be as short as possible.
Installing the Antenna
You can install the antenna on any indoor or outdoor flat vertical surface. Hardware for mounting the
antenna on drywall is provided. If you intend to install your antenna on another surface, you must
provide the appropriate hardware.
Note
Four mounting screws are provided to mount the antenna. To ensure a safe, reliable, and long-standing
installation, you must use all four screws to mount the antenna.
Note
If you install the antenna outdoors, follow the instructions printed on the back of the antenna.
Tools and Equipment Required
An installation kit is shipped with the antenna and consists of the following hardware:
•
Four #8 x ¾ Phillips head screws
•
Four #8 plastic anchors
•
Four end caps
You need the following tools and equipment, which are not provided.
•
A Phillips screwdriver
•
A drill
