1-2
Cisco Aironet 1530 Series Outdoor Access Point Hardware Installation Guide
OL-30864-01
Chapter 1 Overview
Hardware Models
Hardware Models
The model numbers (or part numbers) and configuration for the Cisco Aironet 1532 Outdoor Access
Points are described in
For a detailed description of the declarations of conformity and regulatory information for the 1532
access points refer to
Appendix B, “Declarations of Conformity and Regulatory Information.”
Regulatory Domains
The “
-x
” in the 1532 model numbers represent the domain. For example, in AIR-CAP1532I
-x
-K9, the
-x
represents a regulatory domain for a specific country.
The 1530 series will also support the universal regulatory domain, -UX, which will have the following
model number format:
•
AIR-AP1532I-UXK9
•
AIR-AP1532E-UXK9
For specific regulatory domains supported by each 1532 access point model, refer to the Wireless LAN
Compliance Status at the following URL:
To locate the 1532 access point models, click on
802.11abgn Outdoor Access Points
.
Table 1-1
1532 Access Point Model Numbers and Descriptions
Model (or part number)
Configuration
AIR-CAP1532I
-x-
K9
AIR-AP1532I-UXK9
The AP 1532I has integrated antennas and
contains a 2.4 GHz and 5 GHz radio with an
option to configure in centralized, Flexconnect, or
mesh mode. This is a stand alone unit that can be
wall, pole or tower mounted. It can also operate as
a relay node for other access points that are not
directly connected to a wired network.
AIR-CAP1532E-
x
-K9
AIR-AP1532E-UXK9
The AP 1532E has 4 external antenna ports and
contains a 2.4 GHz and 5 GHz radio with an
option to configure in centralized, Flexconnect, or
mesh mode. This is a stand alone unit that can be
wall, pole or tower mounted. It can also operate as
a relay node for other access points that are not
directly connected to a wired network.
