Cisco Aironet 1520 Series, Hardware Installation Manual

Page: 2 / 66

1-2
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-12632-02
Chapter 1 Overview
Hardware Features
Hardware Features
This section describes the hardware features of the access point. Figure 1-1 , Figure 1-2 , and Figure 1-3
show the access point connectors.
Note The illustrations in this document show all available connections for the access point. Unused
connections are capped with a connector plug to ensure the access point’s watertight integrity. Liquid
tight adapters are provided for connector openings, which can be installed before or after deploying the
access point. The illustrations do not show antenna port 5, which is reserved for future use.
Figure 1-1 Access Point Bottom Connectors
1
AC power connector
1
(optional)
1. Only one power source is usually configured.
5
PoE-Out connector
2
2. PoE = Power over Ethernet
2
Reserved for future use
6
LEDs
3
Antenna connector
3
(Type N)
3. Antenna locations depend upon access point configuration (see the “Antenna Connector Locations” section on page 1-5 ).
7
Antenna connector
3
(Type N)
4 Alternate fiber-optic connector location
(optional) 8 PoE-In connector
1, 2