2-5
Cisco TelePresence System
OL-16441-01
Chapter 2 Options for the Cisco TelePresence System 500-37
Cisco TelePresence Presentation Codec
Parts List for Presentation Codec
Adding a Presentation Codec
To add the Cisco TelePresence Presentation Codec to the CTS-1000, complete the following procedure:
Procedure
Step 6
Power off the system by performing the following steps:
a.
Get the IP address for the system codec as follows:
1.
On the IP phone, locate Manual at the bottom of the screen and press the Manual soft key.
Note
If you cannot locate the Manual soft key, continue to Step
2.
Locate Info at the bottom of the screen and press the Info soft key.
3.
Scroll down to the IP Address listing and copy the address.
b.
Open a browser on a computer that is connected to the network.
c.
In the URL field, type the IP address for the system codec and press
Enter
. The browser launches
the Cisco TelePresence System Administrator.
d.
In the Admin field, type
admin
.
e.
In the Password field, type
cisco
.
Note
If your administrator has changed the user name or password, enter those values.
f.
Click
Login
.
g.
Locate the Phone pane in the upper left-hand corner of the administrator page and select
Troubleshooting > System Reset
. the Restart Cisco TelePresence System button appears at the top
of the window.
Key
Part Description
Part Number
Qty
Notes
Presentation Codec, 800-28202-xx
1
Secondary (Presentation) codec
800-28202-xx
1
2
Handle/Mounting bracket
700-23917-01
2
3
Rear cover
700-27340-01
1
4
Mounting base
800-31148-01
1
5
Left end cap
700-27642-01
1
6
Top Cover
700-27343-01
1
7
Right end cap
700-27344-01
1
8
M4 x 6mm flat head screws
48-0448-01
4
9
M5 x 12mm hex head screws
48-1936-01
4
10
M4 x 10mm pan head screws
48-1948-01
4
