6-2
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-03
Chapter 6 Using EAP Authentication
Overview
Overview
This chapter explains the sequence of events that occurs as soon as you select a profile that uses EAP
authentication as well as after you eject and reinsert the client adapter, reset the Windows CE device, or
are informed that your username and password have expired. The chapter contains three sections based
on the profile’s authentication type:
•
Using LEAP, see below
•
Using EAP-TLS,
•
Using PEAP,
Follow the instructions for your profile’s authentication type to successfully authenticate.
Note
If any error messages appear during authentication, refer to
recommended actions.
Using LEAP
With a Temporary Username and Password
After you select a profile that uses LEAP authentication (with a temporary username and password) or
you eject and reinsert the client adapter or reset your Windows CE device while this profile is selected,
follow the steps below to LEAP authenticate.
Step 1
The Wireless Login Module screen appears (see
).
Figure 6-1
Wireless Login Module Screen
