•
One tunnel for both Cisco VXC VPN traffic and phone VPN traffic
•
Two tunnels that use the same access credentials (one for Cisco VXC VPN traffic and another for phone
VPN traffic)
•
Two tunnels that use different access credentials (one for Cisco VXC VPN traffic and another for phone
VPN traffic). This configuration is only supported when a one-time password is applied.
You can configure the feature to prompt the user only once for access credentials (in the Phone VPN Sign In
window), or once each for the phone VPN (in the Phone VPN Sign In window) and for the Cisco VXC VPN
(in the VXC VPN Sign In window).
Cisco VXC VPN Setup
To set up the Cisco VXC VPN feature, you must first set up the VPN feature for the attached IP phone in
Cisco Unified Communications Manager Administration. Use the submenus under the
Advanced Features
>
VPN
menu path.
To enable the Cisco VXC VPN feature after you enable the IP Phone VPN, you must populate the Enable
VXC VPN for MAC field by using any of the following configuration windows:
•
Phone Configuration window (
Device
>
Phone
)
•
Common Phone Profile window (
Device
>
Device Settings
>
Common Phone Profile
)
•
Enterprise Phone Configuration window (
System
>
Enterprise Phone Configuration
)
The Cisco VXC clients require no configuration to support the VPN. All VPN configuration is performed
for the phone only.
Note
The following table describes the Cisco VXC VPN fields.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
203
Features, Templates, Services, and User Setup
Cisco VXC VPN Setup
REVIEW DRAFT - CISCO CONFIDENTIAL
