Cisco 8841 User Manual Download | Manualshive

Page: 13 / 93

background image

Phone Setup

Cisco IP Phone 8841/8851 Multiplatform Phones User Guide

5

The table below illustrates the Busy Lamp Field icons.

BLF

BLF
and
Speed
Dial

BL
F
and
Call
Par
k

BLF
and
Call
Picku
p

BLF,
Speed
Dial, and
Call
Pickup

BLF,
Speed
Dial,
and Call
Park

BLF, Call
Pickup,
and Call
Park

BLF,
Speed
Dial, Call
Pickup,
and Call
Park

Activate or Deactivate Monitoring of the BLF List

If your administrator has configured a Busy Lamp Field (BLF) list for you, you can activate or
deactivate monitoring of the entire BLF list. The phone monitors each user on a separate line
key. When you activate monitoring, the phone assigns available line keys in sequence to
monitor the BLF list entries.

The phone may use line keys both on the phone and any Key Expansion Module attached to
the phone, or only the Key Expansion Module. This is controlled by your administrator.

The BLF list keys function the same way as individual BLF keys. When you activate monitoring,
the phone displays the status of the monitored lines on the BLF list keys.

The sequential order of the users in the BLF list is set by your administrator and the
corresponding BLF list keys maintains the order. You can choose to configure another feature
such as speed dial on a BLF list key at any time. However, it renders the line key unavailable for
the BLF list.

When you make any change to line key configurations, the phone redoes the BLF list key
assignment. The phone only assigns available line keys in the same order. (

Note

: This can

result in changes to the positions of BLF list keys.)

The phone monitors as many users as possible with the available line keys. You can make
more line keys available for monitoring the list by removing features configured on those keys.

Idle

Alerting

In use

Call
parked

-

-

-

-

Error

«
...
11
12
13
14
15
...
»

Summary of Contents for 8841






























































































Reviews:

No comments

Related manuals for 8841

Brand: Panasonic Pages: 100

Brand: Panasonic Pages: 5

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 12

Brand: Fairphone Pages: 22

Brand: Yealink Pages: 64

Brand: Sony Ericsson Pages: 74

Brand: Point Mobile Pages: 8

Brand: BENQ-SIEMENS Pages: 114

ClearSound CL8400BT

Brand: Geemarc Pages: 73

Brand: Blackberry Pages: 59

Brand: ZTC Pages: 120

Brand: Swyx Pages: 2

Brand: Sagem Pages: 64

Strata DKT2000 Series

Brand: Toshiba Pages: 14

Strata CTX DKT3000 Series

Brand: Toshiba Pages: 139

Brand: Toshiba Pages: 372

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands