Cisco Unified Communications Manager and TFTP Services Are Not Running
Problem
If the Cisco Unified Communications Manager or TFTP services are not running, phones may not be able to
start up properly. In such a situation, it is likely that you are experiencing a systemwide failure, and other
phones and devices are unable to start up properly.
Solution
If the Cisco Unified Communications Manager service is not running, all devices on the network that rely on
it to make phone calls are affected. If the TFTP service is not running, many devices cannot start up successfully.
For more information, see
.
Configuration File Corruption
Problem
If you continue to have problems with a particular phone that other suggestions in this chapter do not resolve,
the configuration file may be corrupted.
Solution
Create a new phone configuration file.
Related Topics
Create a New Phone Configuration File
, on page 171
Cisco Unified Communications Manager Phone Registration
Problem
The phone is not registered with the Cisco Unified Communications Manager
Solution
A Cisco IP Phone can register with a Cisco Unified Communications Manager server only if the phone is
added to the server or if autoregistration is enabled. Review the information and procedures in
to ensure that the phone is added to the Cisco Unified Communications Manager
database.
To verify that the phone is in the Cisco Unified Communications Manager database, choose
Device
>
Phone
from Cisco Unified Communications Manager Administration. Click
Find
to search for the phone based on
the MAC Address. For information about determining a MAC address, see
Determine the Phone MAC Address,
.
If the phone is already in the Cisco Unified Communications Manager database, the configuration file may
be damaged. See
Configuration File Corruption, on page 162
for assistance.
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
162
Cisco IP Conference Phone Troubleshooting
Cisco Unified Communications Manager and TFTP Services Are Not Running
