Cisco 850 Series, Configuration Manual, Page: 73 / 196

6-7
Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide
OL-5332-01
Chapter 6 Configuring a VPN Using Easy VPN and an IPSec Tunnel
Configure IPSec Transforms and Protocols
Configure IPSec Transforms and Protocols
A transform set represents a certain combination of security protocols and algorithms. During IKE
negotiation, the peers agree to use a particular transform set for protecting data flow.
During IKE negotiations, the peers search in multiple transform sets for a transform that is the same at
both peers. When such a transform set is found, it is selected and applied to the protected traffic as a part
of both peers’ configurations.
Step 3
aaa authorization { network | exec | commands
level | reverse-access | configuration } { default |
list-name } [ method1 [ method2... ]]
Example:
Router(config)# aaa authorization network
rtr-remote local
Router(config)#
Specifies AAA authorization of all
network-related service requests, including PPP,
and specifies the method of authorization.
This example uses a local authorization database.
You could also use a RADIUS server for this. For
details, see the
Cisco IOS Security Configuration
Guide and Cisco IOS Security Command
Reference .
Step 4 username name { nopassword | password
password | password encryption-type
encrypted-password }
Example:
Router(config)# username Cisco password 0
Cisco
Router(config)#
Establishes a username-based authentication
system.
This example implements a username of Cisco
with an encrypted password of Cisco .
Command or Action Purpose