Cisco 7920 Series, User Manual

Page: 71 / 134

Advanced Call Handling
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
Privacy
The wireless IP Phone has Privacy enabled by default. When Privacy is enabled, coworkers who share
your line cannot see information about your calls. If you want coworkers who share your line to see
information, you must disable the Privacy feature configured on your phone. See
Preventing Others
from Viewing or Joining a Shared-Line Call, page 62 .
Note The phone can support a maximum of 24 calls on a shared line.
Using Barge to Add Yourself to a Shared-Line Call
You can use barge features (cBarge or Barge) to add yourself to calls on your shared line. Calls must
be non-private calls. See
Understanding Shared Lines, page 60 .
Understanding Barge Features
Depending on how your phone is configured, you can add yourself to a non-private call on a shared
line using either Barge or cBarge.
•
cBarge converts the call into a standard conference, allowing you to add new participants. See
Making Conference Calls, page 48 for more information about standard conferences.
• Barge allows you to add yourself to the call but does not convert the call into a conference or allow
you to add new participants.
Using Barge Features
The table below describes how to use barge features (cBarge or Barge) to add yourself to a call on a
shared line.
If you want to... Then...
See if the shared line is
in use Look for the icon and the “In Use Remote” message.
Add yourself to a call
on a shared line 1. Highlight a remote-in-use call. You might need to use Line View.
2.
Choose Options > Barge or cBarge .