Cisco 7920 Series, User Manual

Page: 35 / 134

An Overview of Your Phone
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
9 Zero (0) key Enters “0” when dialing a number. Allows you to enter a space or these special
characters when you are entering text:

, . ‘ “ | _ ~ ’
10
Asterisk (*)
key Toggles between Ring and Vibrate mode.
Allows you to enter these special characters when you are entering text:

* + - / = \ : ;
11 Keypad Allows you to dial numbers, enter letters, and choose menu items by number.
12
One (1) key Enters “1” when dialing a number. Allows you to access the voice messaging
system.
Allows you to enter these special characters when you are entering text:

! @ < > $ % ^ &
13
Answer/Send
button (green) Allows you to answer a ringing call or, after dialing a number, to place the call.
14
Left softkey
button Activates the softkey option displayed on the screen.
When set up by you, allows you to directly access your messages or open the
Phone Book when the phone is idle.
15
Mute button Toggles the mute feature on or off.
16 Volume button When the phone is idle, allows you to control the ring volume, turn on the
vibrate option, or turn off the ring.
When an incoming call is ringing, allows you to press this button once to silence
the ring for the call.
During a call, allows you to control the speaker volume for the handset,
headset, and speaker mode.
17
Application
button Used with XML applications, such as Push to Talk or other services. For more
information, see
Using the Push to Talk Service, page 68 .
18 Barcode
scanner Use with Java MIDlet applications to allow you to scan barcodes.
Note
Only available on the Cisco Unified IP Phone 7926G
+