Cisco 7920 Series User Manual Download

Page: 109 / 134

Accessing Your User Options Web Pages

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager

FCS REVIEW DRAFT - CISCO CONFIDENTIAL

Note

You can also access PAB and Fast Dials from your phone. See

Using Personal Directory on

Your Phone, page 85

Using Your Personal Address Book on the Web

This section describes how to use your PAB from your User Options web pages.

Configuring Fast Dials on the Web

This section describes how to assign Fast Dials from your User Options web pages.

If you want to...

Then, do this after you log in...

Add a new PAB entry

Choose

User Options > Personal Address Book

Click

Add New

Enter information for the entry.

Click

Save

Search for a PAB entry

Choose

User Options > Personal Address Book

Specify search information and click

Find

Note

To locate all entries, leave search information blank and click

Find

Edit a PAB entry

Search for a PAB entry.

Click a name or nickname.

Edit the entry as needed and click

Save

Delete a PAB entry

Search for a PAB entry.

Select one or more entries.

Click

Delete Selected

If you want to...

Then, do this after you log in...

Assign a Fast Dial code
to a PAB entry

Create a PAB entry. See

Using Your Personal Address Book on the

Web, page 99

Choose

User Options > Fast Dials

Click

Add New.

Change the Fast Dial code, if desired.

Use the Search Options area to find the appropriate PAB entry.

Click a phone number in the Search Results area.

Click

Save

Summary of Contents for 7920 Series







































































































































Search results

Summary of Contents for 7920 Series

Reviews:

Related manuals for 7920 Series

Brands by name

Popular brands

Cisco 7920 Series, User Manual

Search results

Summary of Contents for 7920 Series

Reviews:

Related manuals for 7920 Series

Brands by name

Popular brands