Cisco 7902G - Unified IP Phone VoIP, Administration Manual

Page: 155 / 208

A-7
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Appendix A Additional Configuration Methods and Parameters
Web Page Configuring
Procedure
Step 1 Display the Phone Configuration web page.
For instructions, see the “Accessing Network Settings through a Phone
Configuration Web Page” section on page 4-3 .
Step 2
From the phone’s web page, choose the hyperlink for the information that you
want to display or configure:
•
Device Information —Display only. For more information, see the “Device
Information” section on page A-9 .
•
Network Configuration —Display only. For more information, see the
“Network Configuration” section on page A-10 .
•
Network Statistics —Display only. For more information, see the “Network
Statistics” section on page A-13 .
• Device Logs —Display only. For more information, see the “Device Logs”
section on page A-14 .
•
Network Parameters —Configurable parameters. For more information, see
the Table A-4“Network Parameters” section on page A-15 .
•
Tone Parameters —Configurable parameters. For more information, see the
Table A-4“Tone Parameters” section on page A-20 .
•
Audio Parameters —Configurable parameters. For more information, see the
Table A-4“Audio Parameters” section on page A-20 .
Step 3
If you selected Network Parameters , Tone Parameters , or Audio Parameters ,
follow these steps:
a.
If you have set up a password with the UIPassword parameter in the profile
file, enter the password in the UIPassword field, and then click
Apply . (If you
want to change the password, enter the new password in the two
ChangeUIPassword fields before clicking
Apply .)
b. Make changes to parameters in the Network Parameters, Tone Parameters,
and Audio Parameters areas as needed and lick
Apply to save your changes.
Step 4
Close your web browser.