Cisco 7600 Series, Hardware Installation Manual

Page: 142 / 144

Index
IN-4
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-08
SFP (small form-factor pluggable) optics
2-Port Gigabit Ethernet SPA
3-46
Cisco Systems qualification check
1-6
qualified for SPAs (table) 1-6
SFP-OC12-IR1
3-20
SFP-OC12-LR1
3-20
SFP-OC12-MM
3-20
SFP-OC12-SR 3-20
SFP-OC3-LR2
3-20
SFP-OC48-IR1
3-28
SFP-OC48-LR2
3-28
SFP-OC48-SR 3-27
Shipment
Packing a SIP for
7-4
Packing a SPA for
7-3
short reach
SFP optical transceiver module 3-20
XFP optical transceiver module
3-25, 3-27
short-reach
XFP optical transceiver module 3-34
show diagbus command 2-4
show hw-module slot command
2-4
show hw-module subslot command
2-5
show hw-module subslot oir command 5-6
show idprom module command 2-4, 2-5
show ip interface command
5-6
show module command
2-4, 5-3
show sip-disk command 2-4
SIP (SPA interface processor)
activation (example)
5-7
blank filler plates
1-1
chassis slot installation (figure) 2-3
deactivating 5-3
deactivation (example)
5-7
definition
1-1
general characteristics 1-1
reactivating 5-3
SPA compatiblity (table)
1-3, 1-4, 1-5
subslots
description
1-1
numbering 2-4
specifying location in CLI
2-4
supervisor engine support
2-2
small form-factor pluggable
see XFP or SFP
SPA (shared port adapter)
activation (example)
5-7
Cable management brackets
6-7
chassis slot orientation (figure) 1-3
deactivating 5-4
deactivation (example)
5-7
definition
1-2
double-height description 1-2
heights supported
(figure)
1-2
description
1-2
interfaces 1-3
optics compatibility (table) 1-6
reactivating
5-5
single-height description
1-2
SIP compatibility (table) 1-3, 1-4, 1-5
subslot numbering (figure) 2-3
SPA interface processors (SIPs)
2-1
SSC (SPA services card)
blank filler plates 1-2
definition 1-2
general characteristics
1-2
subslots
description 1-1
numbering 2-4
specifying location in CLI
2-4
supervisor engines
supported by SIPs 2-2