3-25
Cisco Catalyst 4900M Switch Installation Guide
78-18350-01
Chapter 3 Installing the Switch
Removing and Replacing the Fan Assembly
Step 11
Press the power switch to the on (|) position.
Step 12
Verify power supply operation by checking the power supply’s front-panel LEDs.
You should see the following:
•
The LED labeled INPUT OK is green.
•
The LED labeled OUTPUT OK is green.
Step 13
Check the power supply and system status from the system console by entering
show power
command. For more information on this command, refer to the
command reference publication for your switch.
Step 14
If the LEDs or
show power
command output indicate a power problem or other
system problem, see
Chapter 4, “Troubleshooting the Installation,”
for more
information.
Removing and Replacing the Fan Assembly
This section describes how to remove and install the fan assembly.
Required Tools
You will need a Phillips screwdriver for the following two procedures.
Removing the Fan Assembly
Warning
When removing the fan tray, keep your hands and fingers away from the
spinning fan blades. Let the fan blades completely stop before you remove the
fan tray.
Statement 258
