24
Step 6
To test if your selections are suitable ones for your DMP
display, click
Show IP
in the DMP Mode area.
Your DMP display should show a Cisco logo and should
show the IP address for your DMP.
Step 7
To make your configuration changes permanent, even
after you restart your DMP, do the following:
a.
Select
Administration > Save Configuration
.
b.
On the Save Configuration page, click
Save
.
10
Setting Up Centralized
Management
If your DMP will be managed centrally as part of a digital signage
network, you must configure DMPDM and DMM-DSM to work
together.
Summary of Contents for 4400G
Page 31: ...31 ...
