Cisco 3DES, User Manual

Page: 18 / 23

DES/3DES/AES VPN Encryption Module (AIM-VPN/EPII, AIM-VPN/HPII, AIM-VPN/BPII Family)
show crypto engine accelerator statistic
18
Cisco IOS Release 12.3(7)T
Tip
In Cisco IOS Release 12.2(8)T and later releases, you can add a time stamp to show commands that use
the EXEC
prompt timestamp command in line configuration mode.
Related Commands
cgx_cmd_pending Not used in Cisco 2600/3600 VPN. —
packet_loop_max Not used in Cisco 2600/3600 VPN. —
packet_loop_limit Not used in Cisco 2600/3600 VPN. —
Table 4 show crypto engine accelerator statistic Compression Statistics Descriptions for a Cisco 2600, Cisco 3600 or
Cisco 3700 VPN module
Count Label Significance
Associated Error
Number
Command Description
clear crypto engine accelerator
counter Resets the statistical and error counters for the hardware
accelerator to zero.
crypto ca Defines the parameters for the certification authority used for a
session.
crypto cisco Defines the encryption algorithms and other parameters for a
session.
crypto dynamic - map Creates a dynamic map crypto configuration for a session.
crypto engine accelerator Enables the use of the onboard hardware accelerator for IPSec
encryption.
crypto ipsec Defines the IPSec security associations and transformation sets.
crypto isakmp Enables and defines the IKE protocol and its parameters.
crypto key Generates and exchanges keys for a cryptographic session.
crypto map Creates and modifies a crypto map for a session.
debug crypto engine accelerator
control Displays each control command as it is given to the crypto
engine.
debug crypto engine accelerator
packet Displays information about each packet sent for encryption and
decryption.
show crypto engine accelerator
sa-database Displays the active entries in the crypto engine SA database.
show crypto engine accelerator
ring Displays the contents of command and transmits rings for the
crypto engine.
show crypto engine brief Displays a summary of the configuration information for the
crypto engine.
show crypto engine configuration Displays the version and configuration information for the
crypto engine.
show crypto engine connections Displays a list of the current connections maintained by the
crypto engine.