13-20
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 13 Configuring Hybrid REAPWireless Device Access
Configuring Hybrid-REAP Groups
Figure 13-13
HREAP Groups > Edit (Local Authentication > Local Users) Page
e.
To add clients that you want to be able to authenticate using LEAP or EAP-FAST, perform one of
the following:
•
Upload a comma-separated values (CSV) file by checking the
Upload CSV File
check box,
clicking the
Browse
button to browse to an CSV file that contains usernames and passwords
(each line of the file needs to be in the following format: username, password), and clicking
Add
to upload the CSV file. The clients’ names appear on the left side of the page under the
“User Name” heading.
•
Add clients individually by entering the client’s username in the User Name field and a
password for the client in the Password and Confirm Password fields, and clicking
Add
to add
this client to the list of supported local users. The client name appears on the left side of the
page under the “User Name” heading.
Note
You can add up to 100 clients.
f.
Click
Apply
to commit your changes.
g.
Click the
Protocols
tab to open the HREAP Groups > Edit (Local Authentication > Protocols) page
(see
).