12-22
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 12 Configuring Mobility GroupsWireless Device Access
Configuring Auto-Anchor Mobility
Figure 12-14
Mobility Anchor Config Page
b.
In the Keep Alive Count field, enter the number of times a ping request is sent to an anchor controller
before the anchor is considered to be unreachable. The valid range is 3 to 20, and the default value
is 3.
c.
In the Keep Alive Interval field, enter the amount of time (in seconds) between each ping request
sent to an anchor controller. The valid range is 1 to 30 seconds, and the default value is 10 seconds.
d.
Click
Apply
to commit your changes.
Step 2
Click
WLANs
to open the WLANs page (see
).
Figure 12-15
WLANs Page
Step 3
Click the blue drop-down arrow for the desired WLAN or wired guest LAN and choose
Mobility
Anchors
. The Mobility Anchors page appears (see
).
Figure 12-16
Mobility Anchors Page