viii
Cisco MWR 1941-DC-A Mobile Wireless Edge Router Hardware Installation Guide
OL-7872-04
About This Guide
Document Revision History
Document Revision History
The Document Revision History table below records technical changes to this document. The table
shows the document revision number for the change, the date of the change, and a brief summary of the
change. Note that not all Cisco documents use a Document Revision History table.
Objectives
This guide explains how to install, maintain, and troubleshoot your router hardware.
This guide provides minimum software configuration information, not comprehensive information. For
detailed software configuration information, see the Cisco IOS configuration guide and command
reference publications (see the
“Obtaining Documentation, Obtaining Support, and Security Guidelines”
section on page xvi
for more information.)
Warranty, service, and support information is in the
Cisco Information Packet
that shipped with your
router.
Audience
This guide is designed for personnel who install, configure, and maintain the router. These persons
should be familiar with electronic circuitry and wiring practices and be experienced electronic or
electromechanical technicians. This guide identifies certain procedures that should be performed only
by trained and qualified personnel.
Organization
The major sections of this hardware installation guide are listed in the following table:
Revision
Date
Change Summary
OL-7872-04
June 14, 2007
New image from 12.4(12)MR1 was added to replace the image
from 12.4(12)MR.
OL-7872-03
February 28, 2007
Support for the AIM-ATM-8 card was added. Changes on pages
1-6, 1-10, 1-11, and 3-4.
OL-7872-02
November 4, 2005
Revised
Table 3-2
,
“RJ-48C Pinout for Shielded and Unshielded
Cables”
.
OL-7872-01
August 9, 2005
Initial release.
Chapter
Title
Description
Chapter 1
Product Overview
Describes the hardware features and specifications of
the routers.
Chapter 2
Preparing to Install the Router
Describes safety recommendations, site requirements,
network connection considerations, required tools and
equipment, and provides the installation checklist.
