Cisco 1750, Installation Manual

Page: 54 / 84

Problem Solving
xii
Cisco 1750 Router Hardware Installation Guide
78-6169-02
Table 4 Troubleshooting ISDN
WIC Symptom Check the Following Possible Solution(s)
ISDN S/T Router is on,
but the OK
LED on the
card is off.
•
Is the OK LED on the
router front panel on?
•
If no, the router might be
malfunctioning. Contact your
Cisco reseller.
•
Are all ISDN cables
properly connected?
•
If yes, the ISDN line might be
malfunctioning. Check with your
ISDN service provider.
• Is the NT1 LED on? • If no, the NT1 might be
malfunctioning.
ISDN U Router is on,
but the NT1
LED on the
card is off. • Is the OK LED on? • If no, the router might be
malfunctioning. Contact your
Cisco reseller.
•
Are all ISDN cables
properly connected?
•
If yes, the ISDN line might be
malfunctioning. Check with your
ISDN service provider.
•
Is the ISDN line
connected to the card
ISDN U port?
•
If yes, the ISDN line might be
malfunctioning. Check with your
ISDN service provider.