Cisco 1600 series, Hardware Installation Manual, Page: 7 / 14

Installation instruction
Siemens Remote Service COIT-000.812.04.02.02 Seite 7/14 Siemens AG
Rev. 02 02-02 CO SGK Medical Solutions
&RQQHFWLQJ&LVFR:,&WRWKH:$1
The 1-port serial WAN interface card (see Figure 3 – already built in the router) has a DB-60 serial
port. Use the correct cable (contained in the package) for your serial WAN interface card (CAB-
232MT).
6WHS
Use the serial cable and connect one end of the cable to the serial port of the router (Figure 3)
6WHS
Connect the other end of the cable to the asynchronous modem that you provide (Figure 4)
6WHS
Connect the modem to the telephone line
In case the modem you want to use was formerly connected directly to a system/modality, the modem
needs to be reset to factory defaults before it can be used. For Multitech modems, this procedure is
described in
$SSHQL[-
, for other modems, refer to their instruction guide.
)LJXUH
)LJXUH