bracket. If mounting to a wall or ceiling, the Ethernet cable will feed from behind the AP. The "
"
section of this document lists the different powering options and their unique characteristics.
Mount the AP
Attach the AP to the Universal Mounting Bracket
(Picture for Wall mount section and Picture for ceiling mount section )
The AP has four rubber feet that when gently slid in attach to the universal mounting bracket
To attach the AP to the universal mounting bracket properly, align the access point feet over the keyhole mounting slots
on the mounting bracket. Since the cradle is already mounted to the wall, gently guide the AP towards the mounting
cradle until it clicks into place.
Physical Security
Depending on your mounting environment, you may want to secure the AP to its mount location. The access point can
both be secured in several ways. If the AP has been installed using the universal mounting bracket, it should be secured
via a security screw and/or Kensington lock. If the universal mounting bracket was not used, the AP can still be secured
using a Kensington lock.
16
