VCC-FC41SX29CL
Rev.900-696-32-00
©2011 CIS Corporation. All rights reserved.
12
Functions Address
Data
Input Trigger Port Selection
012
0: Camera Link (CC1) Input
1: 12 pins circular connector
(11pin)
Input
Output Data Selection
013
0: 8bit output (8 bit output is fixed at 60fps mode)
1: 10bit
output
Partial Scan Mode
015
0: Full Frame Scan Mode
1: Partial Scan Mode (Operates only at trigger mode)
Partial Scan Start Position
016&017
0
～
27:
※
Set the data of Address 015 to 001.
Address 016 MSB and Address 017 LSB make 16bit in total.
Start Position: 78 H/step Min. data:0(0 H) /Max. data:27(2106 H)
Start Position (016&017) + Effective lines (019&020) should be <= 27.
Camera Mode
018
0: 15fps mode
1: 60fps
mode
Partial Scan Effective Lines
019&020
0
～
27:
※
Set the data of Address 015 to 001.
Address 019 MSB and Address 020 LSB make 16bit in total.
Effective lines: 78 H/step Min. data:0(78 H) /Max. data:27(2184 H)
Start Position (016&017) + Effective lines (019&020) should be <= 27.
Partial Scan Total Lines
029&030
0
～
2309: Read Only
Total lines at partial scan mode or full frame scan mode can be set.
12 pins circular connector,
No. 6pin output
034 0:
LVAL
output
1: FVAL
output
2: DVAL
output
3: Trigger
output
Exposure Signal Polarity
035 0:
Positive
output
1: Negative
output
60fps mode Output Format
036
0: 6Taps Interleaved Output Format
1: 6Taps Separated Output Format (Initial Setting)
Manual Digital Gain
128&129
256
～
1023: 256:-6dB 512:0dB 1023:+6dB
※
Set the data of Address 001 to 004.
Manual White Balance
R 156&157
256
～
1023: 256:
×
1(0dB)
～
1023:
×
4(+12dB)
※
Set the data of Address 003 to 004.
Manual White Balance
B 158&159
256
～
1023: 256:
×
1(0dB)
～
1023:
×
4(+12dB)
※
Set the data of Address 003 to 004.
Manual White Balance
G 186&187
256
～
1023: 256:
×
1(0dB)
～
1023:
×
4(+12dB)
※
Set the data of Address 003 to 004.
Data Save
255
Input 083 or 053 to save the data to EEP-ROM.
