VCC-F32FV19CL
Rev.900-586-31-00
©2009 CIS Corporation. All rights reserved.
7
4.2. Camera Output Signal Specification
Item Specification
Remarks
Horizontal resolution
1000
TV lines (at RGB output)
1900
TV lines (at RAW output)
Sync. Signal Output
(1)
LVAL output: Negative polarity
(2) FVAL output: Negative polarity
(3) DVAL output: BLK output Positive polarity
Camera Link
connector
(1)
HD/VD output: Negative polarity
(2) WEN output: DVAL Positive polarity
12pin circular
connector
Trigger input
Input signal: Polarity Selectable
Input signal level Input signal level : 2
～
5Vp-p under condition that
the camera is connected.
12pin circular
connector
CC1 input
Camera Link
Connector
Video Output Signal Setup level 4
±
2 (Hex) to 8bit video output (00 – FF Hex)
Shutter
(1) Standard mode
OFF (1/10), 1/30, 1/90, 1/500, 1/1000, 1/2000, 1/5000, 1/10000 sec
Manual (Shutter value can be set per 1 line step.)
(2) Standard trigger mode
1/10, 1/30, 1/90, 1/500, 1/1000, 1/2000, 1/5000, 1/10000 sec
(3) Trigger pulse width mode
Approx.1/2s ~ 1/10000s
Gain
0dB, +6dB, MANUAL (min 0dB
～
max+12dB)
Performance guaranteed range : 0
～
+6dB
White Balance
2600K, 3200K, 5600K, 9000K, Manual
γ
Gamma correction
OFF(
γ
=1.0), ON(
γ
=0.45) : selectable (as an factory option)
Serial Communication
With camera link connector input or 12 pin circular connector (option)
input, the camera can be controlled by serial communication.
