![background image](http://html1.mh-extra.com/html/cis/vcc-hd3n/vcc-hd3n_product-specification-and-operational-manual_2608678003.webp)
VCC-HD3N
Rev. 905-0160-01
©2018 CIS Corporation. All rights reserved.
3
1.
Handling Precautions
The camera module must not be used for any nuclear equipment or aerospace equipment with which mechanical failure
or malfunction could result in serious bodily injury or loss of human life. Our warranty does not apply to damages or
defects caused by irregular and/or abnormal use of the product.
Please observe all warnings and cautions stated below.
Our warranty does not apply to damages or malfunctions caused by neglecting these precautions.
Do not use
or store
the camera in the dusty or humid places.
Do not apply excessive force, vibration, or static electricity that could damage the camera. Handle the
camera with caution.
Do not shoot direct images that are extremely bright (e.g., light source, sun, etc.), and when camera is
not in use, please put the lens cap on. When extremely strong light source is shot, smear or blooming
may occur.
Follow the instructions in Chapter
6. “External Connector Specifications”
module. Improper connection may cause damages not only to the camera module but also to the
connected devices.
Confirm the mutual ground potential carefully before connecting the camera to other equipment.
AC leaks from the connected devices may cause damages or destroy the camera.
Do not apply excessive voltage. (Use only the specified voltage.) Unstable or improper power supply
voltage may cause damages or malfunction of the camera assembly.
Since VCC-HD3N is a highly-dense camera module, appropriate heat dissipation shall be considered.
We recommend using a metal base or others to install the camera.