![background image](http://html1.mh-extra.com/html/cis/dcc-hd3n/dcc-hd3n_product-specification-and-operational-manual_2608686003.webp)
DCC-HD3N Rev. 905-0185-00
©2018 CIS Corporation. All rights reserved.
2
1.
Handling Precautions
The camera module must not be used for any nuclear equipment or aerospace equipment with which mechanical failure
or malfunction could result in serious bodily injury or loss of human life. Our warranty does not apply to damages or
defects caused by irregular and/or abnormal use of the product.
Please observe all warnings and cautions stated below.
Our warranty does not apply to damages or malfunctions caused by neglecting these precautions.
Do not use or store the camera module in the dusty or humid places.
Do not apply excessive force or static electricity that could damage the camera module.
Do not shoot direct images that are extremely bright (e.g., light source, sun, etc.). When the camera is
not in use, please put the protection cap on.
Follow the instructions in
Chapter 6, “External Connector Pin Assignment”
for connecting the camera
module. Improper connection may cause damages not only to the camera module but also to the
connected devices.
Confirm the mutual ground potential carefully and then connect the camera module to monitors or
computers. AC leaks from the connected devices may cause damages or destroy the camera module.
Do not apply excessive voltage. (Use only the specified voltage.) Unstable or improper power supply
voltage may cause damages or malfunction of the camera assembly.
DCC-HD3N is an assembly unit for camera modules. It is designed based on the premise of embedding it
in a camera casing. Therefore, appropriate heat dissipation needs to be fully considered when embedding
it.
Assembly without appropriate heat dissipation may cause damages or malfunction.
2.
Product Outline
DCC-HD3N is provided as an assembly unit that is a part of CIS full HD color camera module with Gen
Lock function, VCC-HD3N.
Video output 1080 60p/59.94p/50p (3G-SDI), 1080 60i/59.94i/50i/30p/29.97p/25p/24p/23.97p (HD-SDI),
720 60p/59.94p/50p (HD-SDI) are corresponded.
Features
□
Features CIS original ISP, state-of-the-art “Clairvu
TM
” for superb imaging quality.
□
Sensor board 25.4mm×25.4mm, Main board 25.4mm×38mm, Driver board 25.4mm×43mm.
□
GenLock (3-value analog signals or Black burst )
□
Camera can be controlled via RS-232C.
□
LTC (Longitudinal Time code)
□
With connecting the optional remote controller, camera settings can be set on OSD (On Screen
Display).
3.
Bundled Items
3.1
Standard Bundled Items
□
Sensor board (BI-HD3), Main board (MB-HD2X), Driver board (PD-HD1X)
*Boards are connected with FPC cable (51 pins) at the time of delivery.
□
6 pins connector (power, external trigger, and LTC)
□
4 pins connector (DC IRIS)