5
Device Details
Ports
•
5 Gigabit Ethernet ports (with Auto MDI/X). ETH1 supports PoE in.
•
1 SFP cage, which accepts 1 GB SFP modules.
•
USB Port (disabled).
•
Power
–
connect the included 24v or optional 48v DC adapter.
LED Indicators
•
PWR
–
Indicates the router is receiving power.
•
USR
–
An LED that can be customized by CIS. Default is off.
•
SFP
–
Indicates network activity on the SFP port.
•
1-5
–
Indicates Ethernet activity on ports 1 through 5.
o
Green indicates activity. Red indicates active PoE.
Buttons
Reset button: This button is located on the side next to the USB port. Hold this button while the device is
powered off, then apply power. Keeping holding until the USR LED light starts flashing, (5 seconds) then
release the button to reset to the default CIS configuration. You can use this procedure if you have
forgotten the password to access the device, or simply wish to return the unit to its default configuration
state.
Input Power Requirements
The CIS-NW-POE accepts 11 to 57v DC via the DC jack or PoE on ETH1.
Summary of Contents for CIS-NW-POE
Page 1: ...CIS NW POE User Manual...
Page 6: ...6 Quick Setup...
