24
IP Scan
The IP scan tool locates devices on the network. It can also locate devices that have a static IP set
internally if they are on the same network as the router.
To use the IP scan tool, select the network you wish to scan on (bridge-operations is default), then enter
the network address and subnet mask using CIDR notation.
Select
bridge-operations
and enter
10.100.1.0/24
as the address range. You may have multiple interfaces
and address ranges depending on your configuration. Most use a /24 network size.
Traceroute
The traceroute tool is used to view the network hops between your router and a destination IP. For basic
use, enter the IP address of the host to perform the trace on and click Start.
Summary of Contents for CIS-NW-POE
Page 1: ...CIS NW POE User Manual...
Page 6: ...6 Quick Setup...
