CIS—CRS328
-
24P
PoE Output
The CIS
-
CRS328
-
24P provides PoE output on all Ethernet ports. The output voltage is selected automati-
cally based on the voltage the connected device requires.
•
The switch can power passive PoE devices, and 802.3af/at compliant devices.
•
The PoE out ports are grouped in three PoE out groups of 8 ports each.
•
The total PoE limit is 450w (or 150w per 8 port group).
•
High voltage output supports 30W per port, low voltage output supports 26.5W per port.
Reset Button
Hold this button during while the device is powered off, then apply power. Keep holding until the USR LED
light starts flashing, (5 seconds) then release the button to reset to the default CIS configuration. You can
use this procedure if you have forgotten the password to access the device, or simply wish to return the
unit to its default configuration state.
Warranty Information
Custom Integration Solutions
™
products have a 2
-
Year Limited Warranty. This warranty includes parts and
labor repairs on all components found to be defective in material or workmanship under normal condi-
tions of use. This warranty shall not apply to products that have been abused, modified, or disassembled.
Products to be repaired under this warranty must be returned to Custom Integration Solutions
™
or a des-
ignated service center with prior notification and an assigned return authorization (RA) number.
Contact Information Web: www.custom
-
integration
-
solutions.com
Phone: Technical Support
-
(888) 976
-
3651
The CIS
-
CRS328
-
24P is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EC.
