Cirs Dynamic Phantoms 008A, User Manual, Page: 7 / 16

Removal of Ball Cube Insert (Optional)
1.
CIRS has provided a Ball Cube Removal Tool. Please note
precautions on Ball Cube insert packaging.
2.
Insert Ball Cube Removal Tool into back of Target Moving Rod
at insertion point as shown above.
3.
Gently push forward until Ball Cube is removed. Do not use
other tools for this purpose as they may damage the surface of
the Ball Cube which is fragile.
5.
Use a screw driver to tighten the 4 nylon screws on the
cup.
4.
The Model 18023-A and 18043-A rods connect to the motion
actuator with cup holders. Insert the lung rod thru the hole of
the phantom body. If the body is properly aligned the rod will
slip into the cup. Ensure that the pin hole on the rod is aligned
with the pin inside the cup.