Cirs 008PL User Manual Download Page 10

8

All standard CIRS products and accessories are warranted by CIRS 
against defects in material and workmanship for a period as speci-
fied below. During the warranty period, the manufacturer will repair 
or, at its option, replace, at no charge, a product containing such 
defect provided it is returned, transportation prepaid, to the manu-
facturer. Products repaired in warranty will be returned transportation 
prepaid.

There are no warranties, expressed or implied, including without 
limitation any implied warranty of merchantability or fitness, which 
extend beyond the description on the face hereof. This expressed 
warranty excludes coverage of, and does not provide relief for, 
incidental or consequential damages of any kind or nature, includ-
ing but not limited to loss of use, loss of sales or inconvenience. The 
exclusive remedy of the purchaser is limited to repair, recalibration, 
or replacement of the product at manufacturer’s option.

This warranty does not apply if the product, as determined by the 
manufacturer, is defective because of normal wear, accident, mis-
use, or modification.

NON-WARRANTY SERVICE

If repairs or replacement not covered by this warranty are required, a 
repair estimate will be submitted for approval before proceeding with 
said repair or replacement.

Product

Warranty Period

Model 008PL- Dynamic 

Platform

24 Months

Warranty

RETURNS

If you are not satisfied with your purchase for any reason, please 
contact Customer Service or your local distributor prior to returning 
the product. Visit http://www.cirsinc.com/distributors/ to find your 
local distributor. Call 800-617-1177, email [email protected], or fax 
an RMA request form to 757-857-0523. CIRS staff will attempt to 
remedy the issue via phone or email as soon as possible. If unable 
to correct the problem, a return material authorization (RMA) number 
will be issued. Non-standard or “customized” products may not be 
returned for refund or exchange unless such product is deemed by 
CIRS not to comply with documented order specifications. You must 
return the product to CIRS within 30 calendar days of the issu-
ance of the RMA. All returns should be packed in the original cases 
and or packaging and must include any accessories, manuals and 
documentation that shipped with the product. The RMA number 
must be clearly indicated on the outside of each returned pack-
age. CIRS recommends that you use a carrier that offers shipment 
tracking for all returns and insure the full value of your package so 
that you are completely protected if the shipment is lost or damaged 
in transit. If you choose not to use a carrier that offers tracking or 
insure the product, you will be responsible for any loss or damage 
to the product during shipping. CIRS will not be responsible for lost 
or damaged return shipments. Return freight and insurance is to be 
pre-paid.  

With RMA number, items may be returned to:

 CIRS
 Receiving
 

900 Asbury Ave,

 

Norfolk, Virginia, 23513 USA

Summary of Contents for 008PL













Reviews: