Cirrus Garmin GFC 700, Maintenance Manual

Page: 32 / 42

C
HAPTER
22-10: GFC 700 A
UTOMATED
F
LIGHT
C
ONTROL
S
YSTEM
CIRRUS A
IRPLANE
M
AINTENANCE
M
ANUAL
M
AINTENANCE
P
RACTICES
MODELS SR22
AND
SR22T
32
mately 540° counter-clockwise such that it exits forward at bottom of
capstan.
2 On servo capstan, position bridle cable stop-ball at 12 o’clock position
(stop-ball at top of capstan), and wrap short end of bridle cable approxi-
mately 540° clockwise such that it exits aft at bottom of capstan.
(c) Reassemble capstan.
1 Position slip clutch cartridge into capstan.
2 Install retaining ring securing slip clutch cartridge to capstan.
3 Position capstan assembly to servo mount.
4 Install bolt and washer securing capstan assembly to servo mount. Torque
bolt 35.0±5.0 in-lb (3.95±0.56 Nm).
(Refer to 20-60)
(d) Install cable guards.
(e) Position stiffener ring to capstan cable guards and secure with screws and
washers. Torque screws 10.0±2.0 in-lb (1.13±0.23 Nm).
(Refer to 20-60)
(4) Installation - GSM 86 Yaw Servo Mount
(a) Position yaw servo to mounting bracket and secure with bolts and washers.
(b) Torque bolts 35.0±5.0 in-lb (3.95±0.56 Nm). (Refer to 20-60)
(c) Perform Adjustment/Test - GSM 86 Yaw Servo Mount Bridle Cable Tension. (Refer
to 22-10)
(d) Connect yaw servo plug to socket.
(e) Reset YAW SERVO circuit breaker.
(f) Perform Operational Test - GFC 700 Autopilot. (Refer to 22-10)
(g) Install access panel RE3. (Refer to 6-00)
(5) Adjustment/Test - GSM 86 Yaw Servo Mount Bridle Cable Tension
(a) Acquire necessary tools, equipment, and supplies.
Description P/N or Spec. Supplier Purpose
Scale
6.0 inches (15.24 cm) - Any Source Rudder deflection
determination.
23 Dec 2016