CDB5480U
DS893DB5
37
2.8.3
Setup and Test Window
The
Setup and Test
window allows the user a way to access CS5480 registers and send commands to
the CS5480 directly. See Figure 31.
Figure 31.
Setup and Test
Window
There are three types of transactions: Write, Read, and Send. The CS5480 memory is organized by
pages. In order to properly write a register it is necessary to set the
Page
,
Address
, and
Value to Write
field and then press the
Write
button. To read a register it is necessary to set the
Page
and
Address
and
then press the
Read
button. The register result will be displayed in the
Value Read
field. To send a
command to the CS5480, enter the command in the
Command
field and press the
SEND
button. Refer
to the CS5480 data sheet for more details on registers and commands.
Summary of Contents for CDB5480U
