Installation Procedure
1000
1000HX
Alarm Box Add-On Tech. Note page 5
4.
Unlock the quarter-turn fasteners on the Processor Assembly, and lift it gently
from the chassis as shown. Be sure to gently remove the processor at an
angle as shown! This will avoid snapping the pogo pin that grounds the
processor to the chassis. Note the ribbon cable connected to the Processor.
5.
Turn the Processor Assembly over gently. You’ll see the ribbon cable still
connected to it. The wires running to the system speaker are also still
connected.
Ribbon cable
Ribbon Cable
(still connected)
(still connected)
Speaker Wires
