URBAN WB DC
8
Installation Guide
The Charge Point is designed for installation in indoor and outdoor areas. For
each of the different conditions of installation, the device must be installed safely
and ensure adequate protection.
• Charge Point must not be installed in
areas where there is potential risk of
explosions or any salinity level.
• Charge point must not be installed in
industrial areas with high level of humidity
or pollutants.
• Do not install the Charge Point where
falling objects may damage the
equipment.
• The surface where the Charge
Point is placed must withstand the
mechanical forces.
• Do not use this device for anything
other than electric vehicle charging
modes are expected in IEC 61851.
• Do not modify this device. If modified,
CIRCUTOR
will reject all responsibility
and the warranty will be void.
• Comply strictly with electrical safety
regulations according to your country.
• Do not make repairs or manipulations
with the device energised.
• Only trained and qualified personnel
should have access to electrical parts
inside the Charge Point.
• Check the installation annually by
qualified technician.
• Remove from service any item that
has a fault that could be dangerous
for users (broken plugs, caps that
don’t close...).
• Use only
CIRCUTOR
supplied spare
parts.
• Do not use this product if the
enclosure or the EV connector is
broken, cracked, open, or shows any
other indication of damage.
Refer to TECHNICAL DATA section for more information about environmental
installation conditions.
I m p o r t a n t S a fe t y I n s t r u c t i o n s
Read carefully all the instructions before starting in or-
der to ensure properly installation of the Charge Point.
2
A
Summary of Contents for URBAN WB DC Series
