28
RECmax-CVM
Instruction Manual
Table 16 (Cont�): Display screens: Normal operating status�
Display screens: Normal operating status�
Screen to access the communications settings parameters display�
(6)
Hold down the
PROG
key (> 3s) to access the screens displaying the RS-485
communications settings parameters
(
5.1.2.- COMMUNICATIONS SETTINGS PARAMETERS
)�
(5)
The 4-pole
RECmax-CVM
model monitors whether the device connection is correct� If the connection has not
been made correctly, for example L2 is not connected, the screen in
�
REC
Figure 16: Voltage errror screen�
(6)
Temporary screen, after 5 seconds of keyboard inactivity it jumps to the
Delay and Sensitivity
screen�
