background image

 SAFETY PRECAUTIONS

 DISCLAIMER

CIRCUTOR, SA

 reserves the right to make modifications to the device or the unit specifications set 

out in this instruction manual without prior notice. 

CIRCUTOR, SA

 on its web site, supplies its customers with the latest versions of the device specifica-

tions and the most updated manuals.   

                              

 

 

 

    

 

 

      

                                            

                                               www.circutor.com

CIRCUTOR, 

recommends using the original cables and accessories that are supplied 

with the device.

DANGER

Warns of a risk, which could result in personal injury or material damage.

ATTENTION

Indicates that special attention should be paid to a specific point.

Follow the warnings described in this manual with the symbols shown below.

If you must handle the unit for its installation, start-up or maintenance, the following should be 

taken into consideration:

Incorrect handling or installation of the unit may result in injury to personnel as well as damage to the 

unit. In particular, handling with voltages applied may result in electric shock, which may cause death 

or serious injury to personnel. Defective installation or maintenance may also lead to the risk of fire.

Read the manual carefully prior to connecting the unit. Follow all installation and maintenance in-

structions throughout the unit’s working life. Pay special attention to the installation standards of the 

National Electrical Code.

Refer to the instruction manual before using the unit

In this manual, if the instructions marked with this symbol are not respected or carried out correctly, it can result 

in injury or damage to the unit and /or installations.

CIRCUTOR, SA

 reserves the right to modify features or the product manual without prior notification.

3

Instruction Manual

ReadWatt

Summary of Contents for ReadWatt

























Reviews: