61
Instruction Manual
MYeBOX 150 - MYeBOX 1500
If from any setup menu screen no key is pressed for 5 minutes, the device quits the setup menu
and returns to the Phase-Neutral Voltages screen of the
Measure
display menu.
Note:
Setup menu changes must be made while data logging is off.
6.1.- SETUP MENU:
MEASURE SETUP
Measure
setup menu, where the device’s measurement
parameters are configured.
MEASURE
SETUP
Figure 50:Measure setup menu, main screen�
Press the
key to enter the setup menu.
6�1�1�- RATED VOLTAGE
This screen is used to configure the rated phase - neutral voltage value.
OOO230.50
NOMINAL VOLTAGE
Press the
key to enter edit mode.
Use the
and
keys to write or change the value of the blinking digit.
When the value on the screen is as desired, use the
and
keys to move the editing cur-
sor.
Minimum configuration value:
(Rated Voltage / Voltage Ratio) ≥ 50.
Maximum configuration value:
(Rated Voltage / Voltage Ratio) ≤ 1000.
Maximum possible voltage ratio:
9999.
Note:
The voltage ratio is the ratio between the primary and secondary voltage.
Press the
key to confirm.
Use the
and
keys to toggle between the menu’s setup screens.
Summary of Contents for MYeBOX 150
Page 2: ...2 MYeBOX 150 MYeBOX 1500 Instruction Manual...
Page 90: ...90 MYeBOX 150 MYeBOX 1500 Instruction Manual 14 CE CERTIFICATE...
Page 91: ...91 Instruction Manual MYeBOX 150 MYeBOX 1500...
Page 92: ...92 MYeBOX 150 MYeBOX 1500 Instruction Manual...
