Figure 29: Device screen: Commands�
STEP 2�1�- Entering a new device
Press
Add device,
to add a new device, the screen in
will be shown.
Figure 30: Device screen: Add Device�
Name:
Device name.
Description:
Brief description of the device.
Profile:
Select the device’s data profile, configured in the section
“STEP 1.1.- Creating a new profile”.
Protocol:
Select the type of communication:
ModbusRTU
or
ModbusTCP
.
When selecting the
ModbusRTU
communication type, the following parameters have to be configured:
●
Baudrate:
Select the communications baud rate:
9600, 19200, 38400, 57600, 115200.
●
Stop bits:
Select the bits stop number:
1 or 2
.
●
Parity:
Select the parity type:
None
,
Even
,
Odd
.
●
Slave ID:
Indicate the slave ID or Modbus peripheral.
●
Timeout:
Indicate the communications wait time in seconds.
When selecting the
ModbusTCP
communication type, the following parameters have to be configured:
●
IP address:
IP address of the device.
28
line-EDS-Cloud
Instruction Manual
