Circutor line-EDS-Cloud, Instruction Manual

Page: 19 / 64

6.- CONFIGURATION WEBSITE
The configuration website for the device is accessed via the IP address. The default configuration for
line-EDS-Cloud is in DHCP mode; the device can be identified by its MAC address using software such
as the Advanced IP Scanner.
Note:
There are two options for finding the
line-EDS-Cloud
device on a local network:

Using the Avahi / bonjour discovery protocol.

Access via crossover cable to the local IP of the device: 100.0.0.1 with a subnet mask 255.255.255.0
To access the configuration website, open the screen shown in
Figure 15
, where you enter the User
and Password. The default values are shown in
Table 11
.
Figure 15: Accessing the configuration website�
Table 11:Accessing the configuration website�
Accessing the configuration website�
Use
admin
Password circutor
Note:
For security reasons, you need to change the login password. When you first log into the website
and enter the default password, a screen opens for you to change the password.
Once validated, the main screen can be accessed,
Figure 16
.
Figure 16: Main screen�
19
Instruction Manual
line-EDS-Cloud