66
line-CVM-D32
Instruction Manual
value in %.
Use keys
and
to modify the digit's value.
Press key
to skip through the digits.
Hysteresis:
Minimum value:
0%.
Maximum value:
99%.
Hold down key
to set
contact status
(CONTACT TYPE)
.
Use keys
and
to skip through the different options:
NC,
Contact
normally closed.
NO,
Contact normally open.
Hold down key
to validate the value.
Use key
to skip to the next programming point.
6�6�5�- LATCH
Note:
Screen visible if the selected digital output variable is in
or
This screen enables alarm latching configuration.
LATCH
NO
0
S
TIME ON
OUT1
SETUP
Hold down key
to set
latching
(LATCH)
, i.e. if it remains interlocked after the alarm is triggered, even
if the event that triggered it disappears.
Use keys
and
to skip through the different options:
NO,
Latching is not activated.
YES,
Latching is activated.
TIME
, Alarm latching is activated for a set time,
Latching time
.
Hold down key
to set
Latching time
(TIME ON)
. The time in seconds that the alarm is interlocked is
displayed. After such time, if the alarm status no longer applies, disconnection delay is activated
.
Use keys
and
to modify the digit's value.
Press key
to skip through the digits.
Latching time:
Minimum value:
0 s.
