55
Instruction Manual
line-CVM-D32
Use keys
and
to skip through the different options:
8N1,
no parity, 8 data bits, 1 stop bit
8O2,
odd parity, 8 data bits, 2 stop bits
8E2,
even parity, 8 data bits, 2 stop bits
8N2,
no parity, 8 data bits, 2 stop bit
8O1,
odd parity, 8 data bits, 1 stop bit
8E1,
even parity, 8 data bits, 1 stop bit
To validate the option, hold down key
.
Hold down key
to configure
parameter display
refresh time
via modbus
(MEASURE TIME)
.
Use keys
and
to skip through the different options:
200
ms
,
3
s,
User: x
min, value set in the
aggregation period
parameter, (
"
6.1.5.- CALCULATION PERIODS
”
).
Hold down key
to validate the value.
Use key
to skip to the next programming point.
6�5�- RATIO CONFIGURATION
6�5�1�- CO
2
EMISSIONS IN CONSUMPTION, TARIFFS 1 AND 2
This screen enables carbon emission ratio configuration in consumption.
Carbon emission ratio is the amount of carbon released into the atmosphere to produce one unit of
electricity (1 kWh).
The European mix ratio is approximately 0.65 kgCO
2
per kWh.
RATIO T1+
0.00000
0.00000
RATIO T2+
kgCO2
SETUP
Hold down key
to set
the emission ratio
for Tariff 1 in consumption
(RATIO T1+)
.
Hold down key
to set
the emission ratio for Tariff 2 in consumption
(RATIO T2+)
.
Use keys
and
to modify the digit's value.
Press key
to skip through the digits.
Hold down key
to validate the value.
