Circutor eHome Series, Installation Manual

Page: 7 / 26

7
Installation Guide
eHome
This manual contains all the necessary information for the safe use of the Wallbox eHome
Electric Vehicle (EV) Charge Point.
This document has different sections such as step-by-step installation procedure and technical
data
.
ELECTRIC RISK
Take precautions to make the electrical connection inside the unit.
Unit must be disconnected from any power source during commissioning.
ATTENTION!
Indicates that the damage to property can occur if appropriate precautions
are not taken
So, hello!
• Complies with IEC 61851, Electric vehicle conductive charging system (IEC
61851-1 & IEC 61851- 22).
• Complies with IEC 62196, Plugs, socket-outlets, vehicle couplers and vehicle
inlets (IEC 62196-1 and IEC 62196-2).
• Standards: 2014/35/UE, LVD;2014/30/UE, EMC.
• RFID complies with ISO 14443A/B
(*)
Depending on the model, compliance with some standards may vary
THE FOLLOWING SYMBOLS ARE USED FOR IMPORTANT
SAFETY INFORMATION IN THIS DOCUMENT