Circutor eHome Series, Installation Manual

Page: 16 / 26

16
eHome
Installation Guide
B
Positioning
Make holes for fastener screws.
T ap drill M 6
Measures in mm
Front view
MIn. 600- / Max. 1200
238
158
79
1. Mark 3 holes taking into account the picture measurements (also written on the rear face of the box).
2. Place the enclosure on a flat surface.
3. Use 3x45mm screws to fix the Charge Point to the wall.
4. Check whether the box has any inclination using a level tool.
5. Use Ø 6 drill size to make the 3 holes into the wall.
6. Install the anchor according to the surface material.