26
DHC-96 CPM 1500
Instruction Manual
To validate the data, press the
key.
Use the
and
keys to browse the configuration screens of the menu.
5�3�2�-
ANALOG OUTPUT PARAMETER
This screen is used to configure the parameter that is acted upon by the analogue output.
itEn
-
U
Use the
key to browse the different options:
U
, Analog output of the voltage measurement.
i
, Analog output of the current measurement.
P
, Analog output of the power measurement.
To validate the data, press the
key.
Use the
and
keys to browse the configuration screens of the menu.
5�3�3�- READING FOR THE START OF THE ANALOG OUTPUT
In this screen, the reading value from which the analog output is started is configured.
ds
0000
V
Use the
, key to modify the value of the flashing digit
When the desired value is shown on the screen, press the
key to skip the digit.
Minimum configuration value:
0
Maximum configuration value:
0.5 x
A
.
Note:
The value of the
A
variable varies depending on the
analog output parameter
programmed, see
.
Table 8: Value of the A variable�
Analog output
parameter
A
V, voltage
PT-1
I, current
CT-1
P, power
PT-1 x CT-1
(2)
(2
)
The 4 most significant digits.
Note:
FS
(End of the analog output)
-
DS
(Start of the analog output) ≥ 500
Summary of Contents for DHC-96 CPM
