Circutor DHB-402, Instruction Manual

Page: 25 / 60

When the button is pressed, the unit goes to the main screen of the display menu (
Figure 23
).
Default value : Orange .
4�7�3�4� UPPER COLOUR
This screen is used to configure the upper colour of the display. In other words, this is the display
colour when the measured value is above the upper colour limit (see section
“4.7.3.6. UPPER COLOUR
LIMIT”
).
The screen flashes between the symbol and the configured value (
Figure 27
)
Figure 27:Upper colour screens�
To modify the options, press the button.
The colour options are:
Green. Orange .
Red.
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the button. The unit goes back to the
screen shown in
Figure 27
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the display menu (
Figure 23
).
Default value: red
.
4�7�3�5� LOWER COLOUR LIMIT
This screen is used to configure the value of the lower colour limit.
The screen flashes between the symbol and the configured value (
Figure 28
).
Figure 28:Lower colour limit screens�
25
Instruction Manual
DHB-402 DHB-424